As you know, BLU Studio X is the most popular and powerful in the world today. If you are a newcomer to the Blu world then you will get some little problems because of your knowledge of BLU Studio X. You think these problems seem complex. Don’t think like that. It’s all about your experience. If you are a new user precisely you will think like that.. Read More – ADDING IR SENSOR | AS REMOTE
This article will help you to troubleshoot that all problems on your BLU Studio X very easily. A lot of problems in your BLU Studio X can identify by once you enable the Safe Mode on your device. Most of Blu users are following this method. but there are other ways to fix your device’s problems. By doing Master Reset on your BLU Studio X. but it will double your work. Read More – Screen overlay Detected Problem solved on BLU Studio X
Why want to boot into safe mode on BLU Studio X?
It will disable all of your device’s third-party apps. And only enable pre-installed apps and they will be restored when turn Off SafeMode . Something like after reset your phone. (Data will not be lost. only disable) You can use safe mode when you face ” Screen overlay Detected” , or to check Virus App , MIc , Sound Not working or Slow Down. Read More – What Can Do With Safe Mode
What to do in safe mode:
The purpose of Safe Mode is to allow you to troubleshoot Android and to determine the reasons for not function correctly. Once you have solved the problem, then you can restart the Android for normal use.
boot into safe mode on BLU Studio X:
Here are some steps that you have to follow:
- Turn Off your BLU Studio X .
- Press and Hold Power Button.
- Release Power button and hold Volume Down Key.
- Hold Volume Down Key.
- Release Volume Down key and unlock your BLU Studio X .
Here we are describing above methods Step by Step With Pictures ..
Step 1 : Turn Off your BLU Studio X
- To do this first you have to turn off your BLU Studio X. As shown below, hold the Power Button for few seconds and select the option to turn off your BLU Studio X.
Step 2 : Press and Hold the Power Button
- After switch off your device then turn on your device again by holding the Power Button.
Step 3 : Release Power button and hold Volume Down Key
- After you press the power button on your BLU Studio X then immediately press and hold the Volume Down key when appears the Blu logo or wait for the first lights up on your screen.
- If the above method does not work, then press Volume Down + Volume Up
- When you start to press the volume down key remember that release the power button. Because in that time you can press one button only.
Step 4 : Hold Volume Down Key
- Please hold the Volume Down key for a few seconds until finish restarting and appears the Lock Screen. Like shown below.
- Then see properly that is there displaying Safe Mode icon on your left corner of the screen.
Step 5 : Release Volume Down key and unlock your BLU Studio X
- Once display the Lock Screen and Safe Mode then release the volume down key.
- Now you can unlock your Blu with a lock screen. Here, you have successfully enabled Safe Mode on your Blu.
An alternate 2: boot into safe mode on BLU Studio X
- Press and hold the Power button until the Power off box prompt appears.
- Touch and hold Power off until the Safe mode prompt appears.
- To confirm, tap Safe mode. (you can try this if you have a problem with Volume Down)
Turn off safe mode on BLU Studio X
- Press and hold the Power key.
- Tap Restart Now.
It’s all about the simple restart process of an Android device that turns off the safe mode. Read More : I can’t Turn Off Safe Mode
Thank You for Staying with us. If this “boot into safe mode on BLU Studio X” post helped you, So then please share this website to all Social media like Facebook, Twitter, and Reddit so then Others can find this SafeMode Guide. If you have any problem then don’t hesitate, feel free to Leave a Comment with an Error Message. Keep viewing our page and don’t forget to subscribe. we will update you with the latest news